2x100W Multi-purpose Amplifier

Model: PRO-200-A

Compare

Project List

Product Info

Tech Specs

Documents

The PRO-200A utilizes premium circuit and amp design to serve at the perfect unit to power the entire Klipsch Professional Series.

POWER OUTPUT, rated at 2x100 Watts (stereo) into 4 Ohm
HIGH POWER OUTPUT (bridged mode), rated at 200 Watts into 8 Ohm
SUBWOOFER AMPLIFIER, adjustable crossover frequency 50 Hz – 150 Hz
FULL RANGE AMPLIFIER to power a full stereo 2.1 or 2.0 system
DAISY CHAIN CAPABILITY for larger installs and theater systems
EXTENSIVE HEAT SINKS for reliable operation and long life of the amplifier
HIGH CURRENT DISCRETE POWER TRANSISTORS in the output stage for the best possible performance
AUTOMATIC POWER TURN “ON” for maximum energy efficiency
FRONT MOUNTED LEVEL CONTROL for easy setup and adjustability
GOLD PLATED RCA input and output jacks
HEAVY DUTY push button binding posts for easy connection
OVERLOAD PROTECTION for long lasting, high performance audio

Maximum Frequency Response (Bandwidth): 150 Hz
Maximum Frequency Response (Bandwidth): 0.15 kHz
Minimum Frequency Response (Bandwidth): 50 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Signal to Noise Ratio: 100 dB
Total Harmonic Distortion + Noise (THD+N): 0.10 %
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 115 Volts
Depth: 12.75 in
Height: 5.50 in
Width: 5.69 in
Product Weight: 11 lbs
Rated Power Output: 2 x 100 Watts (Stereo) into 4 ohm Load 200 Watts (BTL) into 8 ohm Load
Crossover Frequency Response: at Min position 18.5-55.2Hz 40Hz/0dB ref at Max position 18.2-168.8Hz 40Hz/0dB ref
Auto Turn On Sensitivity: 5mV +/-2mV Full Range 1KHz 5mV +/-2mV Input 50 Hz
Delay "Off" Time: 8 minutes
Line Out Frequency Response: 20Hz +/-5K - 20 KHz +/-5K 1KHz/0dB ref
Input Impedance: 9.2K ohm +/-5%
Maximum Noise+Hum Vol Max: <1.0mV, Input Shorted
Clearance for Ventilation: Top: Min. 0.375” (10mm) Back: Min. 2” (50mm)|

Amplifier 248140 kb - Data Sheet

Project List

by AVPro Edge

by AVPro Edge

by AVPro Edge